Guide to Beer Keg Taps
Whenever family and friends have a party or go out for a picnic, they usually have beer kegs available. Kegs are very ideal to those who drink a lot which is also cost effective and money saving. IF you have a keg tap, this device will allow you to release the beer into your drinking cup from the keg. If you do not know how to use a keg tap, then you can waste a lot of beer, and this is why you need to be careful is using it since it is actually easy to use. You can splash foam all over you or all over your face. It is not as easy as you see people doing it.
In order to get beer from the keg, you need to control the keg tap. With the use of a lever and with the actions of pulling and pressing it, the beer is released. You can get you beer when the pressure is released and it pushes the beer up to your glass. Technically, a keg tap is a switch that you can turn of or off or you can switch to open or close.
With the beer key directly In front of you, you need to place the beer keg in a stead position for a short while so that the foam it creates when pouring is minimized. Foam build up is the result of too much movement when the keg is being transported. In order to minimize the foal, place the keg where you plan to serve the beer and let it stay for a while. Remove the cap or seal since it will be harder to tap with it. Pros don’t remove the cap or seal because they know how not to put the beer at risk. Since we are not pros we should play it safe.
A portable keg system can be tapped with CO2. The keg receives pressure in a single unit pump and tap combination and this is called party pump. IN this type, the keg and the beer keg tap are separated. You need to attach the pump, and the faucet must be opened to release the pressure in the keg. Pumping gives air pressure into the keg, and a push on the lever, which is the tap handle that releases beer.
A portable beer keg or a pony keg should be finished in a single because after that the beer loses its flavor when it is mixed with air. In a traditional keg and on and off valve is used. This traditional keg does not need air pressure since it works using gravity. In this type, you can get your beer by sampling opening or closing the keg when the valve is used.